A
thermostatically-controlled ceramic heater for melting and keeping
your dop wax at the perfect temperature along with built in storage
for all your tools!
Handy storage for dop sticks, wax, and other
tools.
Lighted switch for convenient and safe
operation.
Wide bezel on warming pot for pre-heating
stones.
Also use for pickling metals like gold,
silver, or copper
Professional grade burs for carving, sintered burs out-cut and out-last regular diamond and abrasive burs
making them an economical investment. Sintering produces a uniform matrix of diamond crystals embedded in a
strong, durable binder and new diamonds are exposed as the point is used. Sintered burs will last 5 to 10
times longer than diamond plated burs and up to 100 times longer than various types of silicon carbide or
aluminum oxide mounted abrasive points.
All shafts measure 35mm excluding the diamond portion.
Maximum Speed Rating: 25,000 RPM
Suitable for shaping and carving all kinds of minerals.
6"
and 8" 3M Micropolishing Films
These
are soft diamond laps for cabbing. Many people swear by the film's
ability to "cup" the surface of cabs to eliminate the orange peel
effect. Tightly graded diamond material is precision coated on a
polyester film backing. Can be used in place of, or in combination
with hard diamond laps. Film disks can be attached to padded backers
and then clamped to a Master Lap for use.
Always use with water.
Available in .5, 1, 3, 6, 9, 20,
and 30 Micron
Available in 6" (156mm) and 8"(200mm) diameters
5mil polyester backing
PSA (Pressure Sensitive Adhesive)
4 Piece Bead Reamer Set
This
set contains 4 tips designed specifically to clean out, enlarge, and
finish off the holes created when making glass beads. They can also
carve, engrave on, and shape stone, plastics, and more. Designed
specifically for use with Inland's Electric Engraver, they can also
be used with the FlexShaft™, or any other adjustable chuck tool to
create custom designs, shapes, and details.
Stock no.50119
Includes: 2 Spear Points 2 Cone Shape Tips
Shaft diameter 2.32mm OD
8" All-In-Wonder
Complete Lapidary Workshop
Inland
Craft Products announces the New 8" SwapTop™ All-In-Wonder™ - the
most affordable complete cabbing system on the market. The
All-In-Wonder can be set up as a 8" or 6" Flat Lap, a 6 1/2" Trim
Saw, and/or a 1" Drum Grinder / Shaper. and each of the three
machines can be set up in just minutes!
Stock no. 10890
Includes: Motor unit, base, 10" x 12" table housing with
metal table insert, blade arbor, blade guard, 6 1/2" DiamondCut Blade,
WaterDrip System, reservoir top, reversible grid surface, 1" 60 grit diamond
drum, BitSert™ with splash guard, allen wrenches, speed controller, (4) 8"
diamond laps, polishing pad, Polishing Powder & Brush, lap splashguard,
Master Lap & arbor, and instruction guides for all three machines.
8" Flat Lap
Machine and 8" Flat Lap Conversion Kit
Inland
Craft Products announces the newest addition to its SwapTop family
of products, the 8" Flat Lap
Machine. With 75% more diamond surface than the 6” Flat Lap
Machine, the new 8” version is a glass worker’s dream come true. The
work surface and splash guard have been totally redesigned to allow
access to the outermost edge of the disks which facilitates grinding
and polishing of the largest possible pieces. And the redesigned
work surface will accept both 6” and 8” laps
Inland No. 10880
The new 8” SwapTop Flat Lap Machine will ship
with four 8" diamond laps (170g, 325g, 600g, and 1200g), two
acrylic Master Laps, one felt polishing pad, polishing compound,
and Water Drip System.
8” laps in other grit
sizes are available separately.
All SwapTop machines carry a Two Year Full Confidence
Warranty
Includes four 8" diamond laps (170g, 325g,
600g, and 1200g), two acrylic Master Laps, one felt
polishing pad, polishing compound, and Water Drip System.
8” laps in other grit sizes are available separately
MSRP: $279.95
*Lapping machines require variable speed operation.
Most SwapTops have variable speed motors; older models can be
controlled with a MiniPhaser
A
thermostatically-controlled ceramic heater for melting and keeping
your dop wax at the perfect temperature along with built in storage
for all your tools!
.
Inland
Craft Products announces the newest addition to its SwapTop family
of products, the 
The
new