Product Information
Inland Wet / Dry™ Mini-Table Saw: Stock no. 91000

The Wet / Dry™ Mini-Table Saw is a safe and affordable tool for cutting wood and the metal cames used in stained glass. Its ability to saw glass, ceramic, stone and a variety of other materials puts the Wet / Dry™ in a class by itself.

Key Features:

• It's powered by a newer, higher torque motor with lower rpm's for more aggressive cutting, more cutting force and longer blade life. The motor is protected for wet operation.
• The 8.5" x 10.5" work surface makes working with longer and larger materials easier and safer.
• The clear throat plate lets you monitor the reservoir water level while wet sawing. Access to the blade arbor is quick and easy.
• The reservoir overflow drain maintains proper coolant level for wet sawing and safely drains any excess away. The reservoir removes easily for wet sawing setup and cleaning.
• The miter gauge rides smoothly in the work surface track for precise angle cutting.
• The Wet / Dry™ Mini-Table Saw comes with a 5" CarbonTuff™ blade for dry sawing. CarbonTuff™ blades are precision cut, hardened, high carbon steel with a 0.50" arbor. CarbonTuff™ blades come in a 4" diameter with 0 0.50" arbor hole for use on Jarmac and DiamondTech model came saws.
• The optional DiamondTuff™ blades use the same base material as CarbonTuff™ blades and are then diamond plated on the perimeter. They are available in 4" and 5" diameter with a 0.50" arbor and are for wet sawing with the proper setup.
• The Wet/Dry™ Mini-Table Saw has the same broad, stable body design as the Impulse™ and Aero™ grinders.
• One Year Warranty.

Product Uses:

• The Wet  /Dry™ Mini-Table Saw is the first of its kind. Run 'dry' with the CarbonTuff™ blade, it saws zinc, copper, soft brass, wood, plastic and other nonferrous metals. Run 'wet' with the DiamondTuff™ blade, it saws glass, ceramic, porcelain, stone, fiberglass, plastic and nonferrous metals.
• Until now, came saws were an expensive extra. The Wet / Dry™ Mini-Table Saw has many uses outside of stained glass including custom cutting wood framing, sawing ceramic tile for the bath and kitchen, and cutting hobby plastics and metals.

Product Specs:

• Stock no. 91000
• Construction: High impact injection molded plastic.
• Motor: 3,000 rpm, high torque, 150 watts.
• Size:12" wide x 10" deep x 6" high.
• Weight:9 lb.
• Available Blades:
  • Stock no. 90940 CarbonTuff™ replacement blade (10.2 cm)
  • Stock no. 90950 CarbonTuff™ replacement blade (12.7 cm)
  • Stock no. 40940 DiamondTuff™ replacement blade (10.2 cm)
  • Stock no. 40950 DiamondTuff™ replacement blade (12.7 cm)

Return to Product PI Archive Index   Go to Current Product Information Section

If you don't see the navigation bar at the top of your screen, click on the above logo.