Inland Product Information
Inland DB-100™ Band Saw: Stock no. 91010

The Inland DB-100™ Mini Band Saw is the first diamond band saw engineered and designed to be a multiple use tool that cuts glass, stone, and a whole lot more.

Key Features:

• The DB-100™ saws dozens of materials, wet or dry. It is packaged with two diamond blades for sawing glass, ceramic, tile, stone, marble, porcelain, plastics, shells and more.
• The optional WoodCut™ and MetalCut™ blades saw wood, plastics, fiberglass, leather, thin brass and copper, tin, printed circuit boards and more.
• Replaceable BladeSert™ blade guides make the most intricate cuts simple. The upper blade guide is adjustable for varying material thickness.
• The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade for wet sawing.
• The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life.
• The motor type is permanent magnet, high torque, with built in speed control. These are powerful DC motors that more consistently maintain torque as speed decreases.
• Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw.
• The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
• The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
• All frame and interior support walls are extra thick for maximum strength and durability.
• Its rigid and quiet. The molded plastic housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle.
• Two Year Full Confidence Warranty

Product Uses:

• Saw stone geodes, bottles, sea shells and marbles in half
• Saw all types and textures of stained glass
• Make wood, stone or glass jigsaw puzzles
• Cut multiple pieces simultaneously
• Cut intricate pieces and shapes
• Reduce scrap by getting the piece on the first try
• Cut complex patterns
• Make scale stone or brick walls from the real material
• Saw tile for authentic scale flooring
• Saw ceramic and flooring stone for home installation

Product Specs:

• Stock no. 91010
• Master Case Quantity: 1
• Construction: Injection molded, structural grade thermoplastic.
• Motor Type: Permanent Magnet DC with built in speed control, up to 2800 Rpm.
• Torque: 48 oz.-in.
• Work surface: 9" x 10"
• Size:18" high x 10" deep x 12" wide.
• Weight: 9.0 pounds
• 2- 37.7" (96cm) stainless steel Standard grit DiamondCut™ Blades: Stock no. 90007
• 2- BladeSert™ Blade Guides: Stock no. 90022
  NOTE: The BladeSert™ will wear with saw use. The slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" (enhanced detail image) it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
• Throat Depth: 4.75" (12 cm)
• Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle.
• Minimum Radius: 3/16" (.5 cm)*
• Maximum Radius: 4.75" (12 cm)
• Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute)
• For even more product information, read the User Guide.
• Available in 115V and 230/240V: Go to the Stained Glass Plug Identification and Stock Number Chart to find the voltage and plug type for countries around the globe and the corresponding Inland product number to order.

Replacement Parts and Accessories:

• BladeSert™ Blade Guides: Stock no. 90022, Master Case Quantity:12
• Metal Work Table: Stock no. 90023,  Master Case Quantity:1
• Plastic Band Saw WorkSurface: Stock  no. 90013, Master Case Quantity: 12
• Upper Drip Guide : Stock no. 90016, Master Case Quantity: 12
• Optional Available Blades:
  • WoodCut™ Blade .022" wide blade with approximately 0.32" of kerf, .130" deep. 14 Teeth per Inch: Stock no. 90001
  • MetalCut™ Blade 7.7" (96cm), .130" deep, .012" thick, 24 Teeth per Inch.: Stock no. 90003

Return to Product Info Index

If you don't see the navigation bar at the top of your screen, click on the above logo.