Inland Product Information
Inland DB-100 Hobby Band Saw: Stock no. 91040
The Inland DB-100 Mini Band Saw is the first band saw engineered and
designed to be a multiple use tool that cuts wood and a whole lot more.
Key Features:
- The DB-100 saws dozens of materials, wet or dry.
- It includes a WoodCut blade for sawing woods, some plastics, and similar products.
- The optional DiamondCut™ and MetalCut blades enable you to saw glass, ceramic, tile, stone, marble, porcelain, plastics, shells,
plastics, fiberglass, leather, thin brass and copper, tin, printed circuit boards and more.
- Replaceable BladeSert blade guides make the most intricate cuts simple. The upper blade guide is adjustable for varying material thickness.
- The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade for wet sawing.
- The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life.
- The motor type is permanent magnet, high torque, with built in speed control. These are powerful
DC motors that more consistently maintain torque as speed
decreases.
- Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw.
- The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
- The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
- All frame and interior support walls are
extra thick for maximum strength and durability.
- It's rigid and quiet. The molded plastic housing absorbs and deadens sawing and motor sounds for
quiet operation. The plastic construction makes it extremely light weight and easy to handle.
- Two Year Full Confidence Warranty
Product Uses:
Cut
woods of all types
- Make scale wood parts
- Create wood jigsaw puzzles
- Cut multiple pieces simultaneously
- Cut intricate pieces and shapes
- Reduce scrap by getting the piece on the first try
- Cut complex patterns with ease
- Make scale stone or brick walls from the real material; saw tile for authentic scale model;
saw ceramic and flooring stone for home installation projects using using the optional
DiamondCut™
- Saw stone geodes, bottles, sea shells, stained glass using the optional DiamondCut™ blade.
- Cut metal templates, scale pieces, tubing, and shapes using the optional MetalCut™ blade
Product Specs:
- Stock no. 91040
- Master Case Quantity: 1
- Construction: Injection molded, structural grade thermoplastic.
- Motor Type: Permanent Magnet DC
with built in speed control, up to
2800 Rpm.
- Torque: 48 oz.-in.
- Work surface: 9" x 10"
- Size:18" high x 10" deep x 12" wide.
- Weight: 9.0 pounds
- WoodCut™ Blade .022" wide blade with approximately 0.32" of kerf,
.130" deep. 14 TPI*: Stock no. 90001
-
2-
BladeSert™ Blade Guides: Stock no. 90022
NOTE: The BladeSert™ will wear with saw use. The slot
that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play
in the blade and the blade becomes more likely to break. How fast this happens will depend on use
and your sawing style. You should check the BladeSert™ for wear each time you
use the saw. Immediately replace the BladeSert™ when it begins to show
signs of widening and wear. You can use the "X" behind the slot as a
wear guide. When the slot has worn out beyond the reach of the legs of
the "X" (enhanced detail image) it is time to replace the BladeSert. It
is no longer providing proper support for your blade. The "X" also
serves as reminder not to deflect the blade more than this amount in
either direction. -
- Optional Available Blades:
- Stock no. 90007: 37.7"
(96cm) Stainless Steel; Standard Grit. (optional)
- Stock no. 90003: MetalCut™ Blade 7.7" (96cm), .130"
deep, .012" thick, 24 Teeth per Inch. (optional)
- Throat Depth: 4.75" (12 cm)
- Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle.
- Minimum Radius: 3/16" (.5 cm)*
- Maximum Radius: 4.75" (12 cm)
- Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute)
- For even more product information, read the
User
Guide.
- Available in 115V and 230/240V
- Go to the plug identification chart to find the voltage and plug type for countries around the globe.
Plug Identification Chart
- Find this product's stock number for your country.
Inland Stock Numbers

If you don't see the navigation bar at the top of your screen, click on the above logo.