Product Information
SwapTop™ 6" Flat Lap Machine: no. 10680

The SwapTop™ 6" Flat Lap is the most affordable full-featured flat lap glass polishing set up on the market. Its water cooled system means no messy oil to clean up. Faster RPM motor allows you to quickly polish and finish. Because of its unique low profile design, the SwapTop can be taken anywhere, but it will still pass muster on the workbench at home.

SwapTop™ Flat Lap Key Features:

• Use For Glass a Range of Glass Projects
  The SwapTop™ Flat Lap can be used to shape and polish a range of glass projects. Use it to shape and finish flame worked beads, hot glass projects, kiln worked projects and fused glass pieces.
• Quiet and Powerful
  Our direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times the price. Comes complete with speed controller.
• 6" Diamond Disks Includes (4) diamond disks, 2 master laps plus a polishing pad.
  (1) 170 Grit 6" Flat Lap
  (1) 325 Grit 6" Flat Lap
  (1) 600 Grit 6" Flat Lap
  (1) 1200 Grit 6" Flat Lap
• Quick and Easy
  No hassle product assembly, operation is easy and straight forward, and diamond disk changes take less than a minute.
• Converts to a Table Saw or Glass Grinder
  The SwapTop 6" Flat Lap easily converts into a wet/dry table saw and a conventional glass grinder. The motor is encased in a cleverly designed base that allows it to operate with the motor shaft either vertically or horizontally. And you can add the other options whenever you want by purchasing the conversion kit. Do the work of several individual machines at a fraction of the cost and free up your work space.
• Available in 115V and 240V
  The SwapTop™ 6" Flat Lap is available in 115V and 240V versions. Go to the Stained Glass Plug Identification and Stock Number Chart to find the voltage and plug type for countries around the globe and the corresponding Inland product number to order.
• Two Year Full Confidence Warranty

Product Uses: 

• Grind and then polish fused, slumped and flame-worked pieces without returning them to a kiln or torch.
• Remove and polish out pontil marks from paperweights, perfume bottles, bowls, vases and other hot glass forms.
• Create glass cabochons from custom murrini and pattern bars for custom and unique design elements or jewelry pieces.
• Improve the fit of your glass or stone pieces for inlays
• Shape glass tiles and tesserae, smalti, and Venetian glass for mosaic work.
• Safety edge and polish glass pieces for projects like coasters, dishes, and wind chimes.
• Remove and polish out scratches from glass.
• Give all your pieces that professionally finished look and feel

Product Specs:

• SwapTop™ 6" Flat Lap Machine - Inland stock no. 10680
  Includes: Motor unit, base, grinder work surface with open grid work surface, (4) 6" diamond laps, polishing pad, Polishing Powder & Brush, Water Drip System, splashguard, 2 Master Laps & arbor, and instruction guide.
• Master Case Quantity: 1
• Size: 11.0" wide x 10" deep x 6.75" high
• Motor Type: Permanent Magnet DC with built in speed control
• Torque: 48 oz.-in. (.339 N/M)
• Watts In: 245 / Watts Out: 154
• RPM: 2,800
• Arbor OD: 1/2"
• Fits any 6" laps with 1/2" arbor holes
• Two Year Full Confidence Warranty
• Available in 115V and 230/240V: Go to the Stained Glass Plug Identification and Stock Number Chart to find the voltage and plug type for countries around the globe and the corresponding Inland product number to order.

Accessory Items:

• 6" Diamond Laps: Our laps are replacement disks which you would use with a "Master lap" (casting). They have a 1/2" arbor hole for mechanically affixing to the master lap. Diamond laps are available in 60, 100, 170, 275, 325, 600, 1200, and 3000 grit diamond.
• 6" Master Lap: A Solid acrylic backer for smooth operation that can be used with any Flat Lap Machine having a 1/2" arbor. Inland no. 436001
• 6" Polishing Pads (3 Pk) - Natural, no color added, wool felt for the best overall polishing pad. PSA backing for easy application and stay-put fit. Inland no. 436005.
• SwapTop Came Saw Conversion Kit: 10" x 12" table housing with metal table insert, blade arbor, blade guard, 6 1/2" General Purpose Blade, allen wrench, and instruction guide. Inland no. 10665.
• SwapTop Glass Grinder Conversion Kit: Reservoir top, reversible grid surface, 1" (WB-9) standard grit diamond bit, BitSert™ with splash guard and complete instruction guide. Inland no. 10655.
• Polishing Compound: Inland no. 50037
• GrinderStation™: A free standing, three sided washable vinyl surround that helps contain overspray. Inland no. 50014.
• MotorShaft Lubricant™: A Teflon based lubricant that prevents tools from seizing on the motor shaft. Inland no. 50022.

Return to Product Info Index

If you don't see the navigation bar at the top of your screen, click on the above logo.