Inland Hobby Products Information
Standard 120Grit Diamond Sanding Drums

Recognized world wide as the benchmark for quality and value.

Key Features:

• More usable diamond makes them longer lasting.
• Brass cores are manufactured on "Swiss precision" machinery for consistent and accurate tolerances. Look for the distinctive Precision Quality Rings.
• Bits made today are virtually identical to ones made years ago. This is good news when replacing bits from an older grinder.
• All Inland bits are measured for trueness before any diamond is applied. This insures that every bit will spin properly on the motor shaft.
• Available in 1" (25 mm), ¾" (19 mm), and ¼" (6 mm) diameters.
• Standard 120Grit Diamond.

Product Uses:

• Use dry to sand, shape, and finish a variety of plastics and woods.
• Use wet to shape, contour, and drill in mineral based materials like tile, stone, ceramic, and glass.
• Improve the fit of your projects for a more finished, professional look.
• Use for  home and hobby projects.
• Use 1" (25 mm) diamond drums for quicker shaping and on larger pieces.
• Use ¾" (19 mm) diamond drums for more detailed shapes.
• Use ¼" (6 mm) diamond drums for fine details and hole drilling.

Product Specs:

• Fits .312" (7.92 mm) arbor
• TIR <.0025" (.0635 mm)
• CDA 360 brass cores
• .625" (15.88 mm) high diamond surface on 1" (25 mm) and ¾" (19 mm) bits
• .50" (12.7 mm) high diamond surface on ¼" (6 mm) bits
• For even more product information, read the User Guide.
• Stock no. 40009 1" (25 mm) 120Grit Diamond Drum
  Master Case Quantity: 12
• Stock no. 40001 ¾" (19 mm) 120Grit Diamond Drum
  Master Case Quantity: 12
• Stock no. 40008 ¼" (6 mm) 120Grit Diamond Drum
  Master Case Quantity: 12

If you don't see the navigation bar at the top of your screen, click on the above logo.