Inland Hobby Products Information
FumeTrap™: Stock no. 60010
The FumeTrap™ provides a safer soldering and working environment by
drawing fumes away from the person traps them in a
disposable activated carbon filter.
Key Features:
- A 110 CFM, axial type fan provides maximum fume intake up to 12-14" away. CFM is Cubic Feet Per Minute and measures the volume of air replaced each minute by the fan.
- The disposable activated carbon filter cartridge "snaps" into the rear of the housing and is easy to install or remove.
- Replacement filters are sold three to a pack. There is no time interval recommended for replacement of the filter since usage of the unit will vary. Indications that replacement is necessary is a visible blockage of the filter when holding the cartridge up to the light and it feels tacky or sticky to the touch.
- A top mounted handle and four non skid rubber feet make it very portable.
- The fixed front grill protects the user from the fan without restricting air flow.
- A 6 ft power cord provides plenty of reach. An in-line on/off switch makes it easy to operate.
- The FumeTrap™ is available in 110V versions for the US, Canada and Japan or 230V/240V models for Europe, England and Australia.
- One Year Warranty.
- Anyone aware of the need for a safer environment when soldering is an excellent customer for a FumeTrap™.
- All hobbyists that solder, glue, and paint should use a ventilation system that evacuates or collects and holds fumes, not re-circulating them as a simple blower fan would. The most effective system is one that filters and vents to the outside. (Before venting anything to the outside, check with your local government for emissions regulations.) Since most artists and hobbyists can't install such a system, the FumeTrap™ fills the need by removing and adsorbing the fumes and vapors created during these processes.
- Most fluxes generate organic and inorganic gases and vapors which we don't think about, but are also harmful with prolonged exposure.
- It's lightweight enough to place right on the project being soldered with soft rubber feet to protect the surface.
- Equipping classrooms with FumeTrap's™ is an effective way to demonstrate the product and improve safety awareness.
- Stock no. 60010
- Master Case Quantity: 6
- Construction: Stamped steel housing.
- Color: Gray fleck body with plastic handle.
- Size: 5" wide x 5" high x 6" deep.
- Weight: 3 lb., 9 oz.
- 1 Amp Draw
- 110 CFM (Cubic Feet / Minute of air moved)
- For even more product information, read the User Guide.
- Available in 115V and 230/240V: Go to the Plug Identification and Stock Number Chart to find the voltage and plug type for countries around the globe and the corresponding Inland product number to order.
- Filter replacements (3 per pack): Inland no. 60006.
Master Case Quantity: 12
Return to Hobby Products Index
If you don't see the navigation bar at the
top of your screen, click on the above logo.