Inland Hobby Products Information
Tile Drilling / Edging Drum

There IS an easier way to do it!

Key Features:

• The Tile Drilling / Edging Drum combines a ¾" (19 mm) standard 120Grit diamond sanding drum with a  ¾" core drill.
• Like all Inland bits, the brass cores are manufactured on "Swiss precision" machinery for consistent and accurate tolerances. Bits are measured for true before the diamond is applied, so the bits spin properly on the motor shaft.

Product Uses:

• Use wet to shape, contour, and drill in mineral based materials like tile, stone, ceramic, and glass.
• Use the core drill end to create  ¾" (19 mm) and larger holes for pipe and electrical fixtures.
• Edge tile, stone, and ceramic to improve the fit and appearance.
• Use for  home and hobby projects.

Product Specs:

• Fits .312" (7.92 mm) arbor
• TIR <.0025" (.0635 mm)
• CDA 360 brass cores
• .625" (15.88 mm) high diamond surface on 1" (25 mm) and ¾" (19 mm) bits
• For even more product information, read the User Guide.
• Stock no. 40024  ¾" (19 mm) Tile Drilling / Edging Drum
• Master Case Quantity: 12

If you don't see the navigation bar at the top of your screen, click on the above logo.