Inland Product Information
Inland InvisibleSponge™ DropOn™ Bit Adapters
Makes grinding cleaner and faster! Because the InvisibleSponge™ DropOn™ system requires so little coolant, there is less mess, less over-spray and the reservoir is easier to clean.
Key Features:
- The InvisibleSponge™ DropOn™ uses is a brass DropOn™ adapter with a screw pump base that pulls water up from the reservoir and circulates it around the bit at the work surface.
- A special plastic BitSert™ with tube that mates with the screw base efficiently pulls coolant onto the bit.
- The InvisibleSponge™ system grinds with much less coolant and less mess than traditional sponge fed systems.
- The low coolant level means no more overfilling and overflowing the coolant reservoir.
- The adapter and BitSert™ come in a 1" version for use on the WizCG™, Impulse and all Wizard™ grinders. The 3/4" version is perfect for the WizlingCG™, and Aero™.
Product Uses:
- The InvisibleSponge™ DropOn™ system combines sponge-less coolant feed with the convenience of DropOn™ bits.
- More coolant gets to the bit and changing bits or grits takes just seconds, no allen wrenches or tools required!
- The InvisibleSponge™ system eliminates all the problems associated with sponges: repositioning them, having them jam up the bit, and less than optimum lubrication while grinding.
Product Specs:
- Stock no. 40090 (DB-1/9-ISA) InvisibleSponge™ Adapter
- Stock no. 40034 3/4" BitSert™ for ISDO system
- Stock no. 40039 1" BitSert™ for ISDO system
If you don't see the navigation bar at the top of your screen, click on the above logo.