Inland Product Information
LampBit™
Make lamps and other three dimensional projects fit better and look more professional!
Key Features:
- Makes it easy to fit panel type lamps and similar 3-dimensional projects.
- Available in standard and FineGrit.
- Get cleaner, narrower solder lines on your panel style lamps.
- Brass cores are manufactured on "Swiss precision" machinery for consistent and accurate tolerances. Look for the distinctive Precision Quality Rings.
- All Inland bits are measured for trueness before any diamond is applied. This insures that every bit will spin properly on the motor shaft.
- Use on all Inland grinders.
Product Uses:
- The LampBit™ is used to grind lamp pieces and other 3-dimensional projects that fit on a miter for a better joint.
- Use the FineGrit LampBit™ for delicate glass and specialty glasses like mirror and antiques.
- The LampBit™ is reversible, with one side at a 9 degree angle for 20 panel lamps, and the other side at an 18 degree angle for 10 panel lamps. Use the side that comes closest to your lamp.
- The LampBit™ makes for cleaner solder lines and a more professional looking project.
Product Specs:
- Fits .312" (7.92 mm) arbor
- TIR <.0025" (.0635 mm)
- CDA 360 brass cores
- .625" (15.88 mm) high diamond surface
- Use the Bit Grit Chart reference guide
- Stock no. 40018 (WB-18) Standard Grit LampBit™
Master Case Quantity: 12 - Stock no. 40019 (WB-18) Fine Grit LampBit™
Master Case Quantity: 12
If you don't see the navigation bar at the top of your screen, click on the above logo.