MAGNALIGHT™
User Instructions

Assembly Instructions

  1. Install a single standard light bulb (not included) up to 60 watts maximum.
  2. There are two bases included with your unit so that you can move the light to different locations. To move simply unplug and pull it out of the base at the lamp stem and insert into second base location. Mount your bases to desired surface using one of the options below.  :
     

    Mounting on a Table or Bench

    Mounting on a Vertical Surface

  3. Plug into a standard 110V outlet
  4. Position vertically by pulling up or pushing down at either of the spring tension joints
  5. The entire unit pivots 360 degrees on the mounting bracket
  6. Head rotates on ball joint to numerous positions
  7. Light turns on with push button switch located on head
  8. Magnifying lens swings away simply by pulling forward. Push toward head to lock back in place

Service

If you have any questions or comments regarding the use of this or any Inland product please call Inland Customer Service at 1-800-521-8428 9 AM to 5 PM EST., email us, or write us at


Inland Craft Products, Co.
32052 Edward
Madison Heights, MI 48071

R1