DURALIFE™ PATTERN
SHEARS
User Instructions
Safety
- Always wear proper eye protection when working with these tools.
- Always use tools in the manner prescribed.
Make sure you are using the correct shear for your project. Pattern shears are available in Foil and Lead versions. Foil shears remove the narrow strip between pattern pieces required to make your copper foil projects fit properly. Lead shears remove a slightly wider strip to account for the width of the heart in lead came. You can also use Lead shears for cutting mosaic patterns which require a slightly larger space between the pattern pieces.
- Pattern shears are three bladed scissors. The single blade is always on top while cutting.
- For best results, cut in the throat of the shears and use short 1/2" strokes.
- Use even smaller strokes when cutting tight turns and deep inside curves to keep the pattern from bending and tearing.
Service
If you have any questions or comments regarding the use of this or any Inland product please call Inland Customer Service at 1-800-521-8428 9 AM to 5 PM EST., email us, or write us at:
|
|
Inland Craft Products, Co. 32052 Edward Madison Heights, MI 48071 |
Document No. 3000/QF/631 |
| If you don't see the navigation bar at the top of your screen, click on the above logo. | ||