MATERIAL SAFETY DATA SHEET
INLAND ROUTER COOLANT
INLAND CRAFT PRODUCTS, CO.
FSC: 8040
NIIM: 00F012888
DOT: Non-regulated
Manufacturer's CAGE: INLAN
Part No. Indicator: A
Chemical Name and Synonyms: Cutting Fluid
Part Number/Trade Name: 50011/Diamond Coolant, Router Coolant
Chemical Family: Cutting Fluid
SECTION I - GENERAL INFORMATION
Manufacturer's Name: Inland Craft Products, Co.
Manufacturer's Street: 32052 Edward
Manufacturer's City: Madison Heights
Manufacturer's State: Michigan
Manufacturer's Zip: 48071
Manufacturer's Emergency Phone: 1-248-583-7150
Manufacturer's Phone: 1-248-583-7150
Date Prepared: 04-23-2008
SECTION II - INGREDIENTS
Proprietary: YES
Ingredient: PROPRIETARY
- Pigments: N/A
- Catalyst: N/A
- Vehicle: N/A
- Solvents: N/A
- Additives: N/A
- Others: N/A
- Base Metal: N/A
- Alloys: N/A
- Metallic Coatings: N/A
- Filler Metal Plus Coating or Core Flux: N/A
- Other: N/A
SECTION III - PHYSICAL DATA
Boiling Point (º F): 212
Vapor Pressure (mm Hg.): @20º C = 20
Vapor Density (AIR=1): >1.0
Specific Gravity (Water=1): 0.98
Percent Volatile by Volume (%): 30.0
Evaporation Rate (Butyl Acetate=1): <1.0
Solubility in Water: Soluble
Appearance and Odor: Amber liquid with neutral odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/A
Flammable Limits: N/A
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam, Water Fog
Special Fire Fighting Procedures: Use self contained breathing apparatus
Unusual Fire and Explosion Hazards: None
SECTION V - HEALTH HAZARD DATA
Threshold Limit Value: N/A
Effects of Overexposure: Liquid and/or vapors may cause eye, skin and lung irritation
Emergency First Aid Procedures:
- Eye and skin contact: Wash with large volume of water
- Inhalation: Normally no problems, remove to fresh air
- Ingestion: Call a physician
SECTION VI - REACTIVITY DATA
Stability: Stable
Conditions to avoid: Do not add nitrites
Incompatibility (Materials to avoid): Mineral acids, strong oxidants and sodium nitrite
Hazardous Decomposition Products: Possible carbon monoxide, nitrogen oxides, sulfur oxides
Hazardous Polymerization: Will not occur
SECTION VII - SPILL OR LEAK PROCEDURES
Steps to be taken in Case Material is Released or Spilled: Keep out of streams or waterways. Collect free liquid. Absorb remainder on inert absorbant
Waste Disposal Method: Incinerate or land fill where permitted under appropriate federal, state and local regulations.
SECTION VIII - SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): None
Ventilation:
- Local Exhaust: None
- Special: N/A
- Mechanical (General): Expected to be satisfactory
- Other: N/A
Eye Protection: Goggles
Other Protective Equipment: None normally needed
SECTION IX - SPECIAL PRECAUTIONS
Precautions for Handling and Storing: Do not freeze. Keep containers closed. Avoid eye and prolonged skin contact.
Other Precautions: Do not add nitrites to this fluid under penalty of federal law. Addition of nitrites leads to formation of a substance known to cause cancer.
If you don't see the navigation bar at the top of the screen, click on the Inland logo above.