MATERIAL SAFETY DATA SHEET
RINSES OFF GLASS CUTTING FLUID

INLAND CRAFT PRODUCTS, CO.
FSC: 8040
NIIM: 00F012888
DOT: Non-regulated
Manufacturer's CAGE: INLAN
Part No. Indicator: A
Chemical Name and Synonyms: Glass cutting lubricant
Part Number/Trade Name: 50057/Rinses Off
Chemical Family: Mixture

SECTION I - GENERAL INFORMATION

Manufacturer's Name: Inland Craft Products, Co.
Manufacturer's Street: 32052 Edward
Manufacturer's City: Madison Heights
Manufacturer's State: Michigan
Manufacturer's Zip: 48071
Manufacturer's Emergency Phone: 1-248-583-7150
Manufacturer's Phone: 1-248-583-7150
Date Prepared: 03-25-2008

SECTION II - INGREDIENTS

Proprietary: YES
Ingredient: PROPRIETARY
Paints, Preservatives and Solvents:

• Pigments: N/A
• Catalyst: N/A
• Vehicle: Water
• Solvents: N/A
• Additives: N/A
• Others: N/A

Alloys and Metallic Coatings:

• Base Metal: N/A
• Alloys: N/A
• Metallic Coatings: N/A
• Filler Metal Plus Coating or Core Flux: N/A
• Other: N/A

Hazardous Mixtures of Other Liquids, Solids or Gasses: Fatty acids, glycols, water

SECTION III - PHYSICAL DATA

Boiling Point (º F): 212
Vapor Pressure (mm Hg.): 1
Vapor Density (AIR=1): N/A
Specific Gravity (Water=1): 1.01
Percent Volatile by Volume (%): N/A
Evaporation Rate (Water=1): 1.0
Solubility in Water: Complete
Appearance and Odor: Blue Transparent Liquid

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): none
Flammable Limits: N/A
Lel: N/A
Extinguishing Media: N/A
Special fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

SECTION V - HEALTH HAZARD DATA

Threshold Limit Value: Not established
Effects of Overexposure: None known. May cause slight irritation on eye contact. As with all products of this nature, good personal hygiene should be practiced
Emergency First Aid Procedures:

• Eye: Flush with copious amounts of water
• Skin: Wash with soap and water
• Inhalation: N/A
• Ingestion: Call a physician

SECTION VI - REACTIVITY DATA

Stability: Stable
Conditions to avoid: N/A
Incompatibility (Materials to avoid): N/A
Hazardous Decomposition Products: CO and/or CO₂
Hazardous Polymerization: Will not occur

SECTION VII - SPILL OR LEAK PROCEDURES

Steps to be taken in Case Material is Released or Spilled: Cover with an abrasive material to avoid slippery surfaces. Small spills may be flushed to sewers with large amounts of water.

Waste Disposal Method: Dispose in accordance with local regulations

SECTION VIII - SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): None deemed necessary
Ventilation:

• Local Exhaust: Only if misted
• Special: N/A
• Mechanical (General): N/A
• Other: N/A

Protective Gloves: N/A
Eye Protection: Safety Glasses
Other Protective Equipment: N/A

SECTION IX - SPECIAL PRECAUTIONS

Precautions for Handling and Storing: Keep from freezing
Other Precautions: None

Return to MSDS Index

If you don't see the navigation bar at the top of the screen, click on the Inland logo above.