MATERIAL DATA SAFETY SHEET
INLAND FLUX REMOVER

INLAND CRAFT PRODUCTS, CO.
FSC: 8040
NIIM: 00F012888
Manufacturer's CAGE: INLAN
Part No. Indicator: A
Chemical Names and Synonyms:
Part Number/Trade Name: 60033/Inland Flux Remover
Chemical Family: Surface active agent

SECTION I - GENERAL INFORMATION

Manufacturer's Name: Inland Craft Products, Co.
Manufacturer's Street: 32052 Edward
Manufacturer's City: Madison Heights
Manufacturer's State: Michigan
Manufacturer's Zip: 48071
Manufacturer's Emergency Phone: 1-248-583-7150
Manufacturer's Phone: 1-248-583-7150

SECTION II - INGREDIENTS

Proprietary: YES
Ingredient: PROPRIETARY
Paints, Preservatives and Solvents:

• Pigments: N/A
• Catalyst: N/A
• Vehicle: Water
• Solvents: N/A
• Additives: N/A
• Others: N/A

Alloys and Metallic Coatings:

• Base Metal: N/A
• Alloys: N/A
• Metallic Coatings: N/A
• Filler Metal Plus Coating or Core Flux: N/A
• Other: N/A

Hazardous Mixtures of Other Liquids, Solids or Gasses
Surfactant: 20-25%

SECTION III - PHYSICAL DATA

Boiling Point (º F): 212 (approximate)
Vapor Pressure (mm Hg.): Aqueous
Vapor Density (AIR=1): N/A
Specific Gravity (Water=1): 1.0
Percent Volatile by Volume (%): Similar to water
Evaporation Rate (Water=1): Similar to water
Solubility in Water: Complete
Appearance and Odor: Light blue, mild odor

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): Non-flammable
Flammable Limits: N/A
Extinguishing Media: N/A
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

SECTION V - HEALTH HAZARD DATA

Threshold Limit Value: Not established for product, acute oral toxicity (LK 50 Rats) = 1.82/kg
Effects of Overexposure: Possible slight irritation to eyes
Emergency First Aid Procedures:

• Eye: Flush with water for 15 minutes, call physician if irritation persists
• Skin: Wash thoroughly with water
• Inhalation: N/A
• Ingestion: Drink water and contact physician

SECTION VI - REACTIVITY DATA

Stability: Stable
Conditions to avoid: N/A
Incompatibility (Materials to avoid): No specific incompatibilities
Hazardous Decomposition Products: Oxides for carbon and sulfur on burning
Hazardous Polymerization: Will not occur

SECTION VII - SPILL OR LEAK PROCEDURES

Steps to be taken in Case Material is Released or Spilled: Flush to drain with water.

Waste Disposal Method: Flush to sewer with water. Consult local, state and federal regulations for disposal of detergent materials. Material may be incinerated.

SECTION VIII - SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): None
Ventilation:

• Local Exhaust: N/A
• Special: N/A
• Mechanical (General): Yes
• Other: N/A

Protective Gloves: Rubber or plastic
Eye Protection: Safety Glasses
Other Protective Equipment: Protective clothing

SECTION IX - SPECIAL PRECAUTIONS

Precautions for Handling and Storing: Keep in closed containers in a cool, dry area. Avoid local overheating.
Other Precautions: None

Return to MSDS Index

If you don't see the navigation bar at the top of the screen, click on the Inland logo above.