MATERIAL DATA SAFETY SHEET
SUPER GEL FLUX

INLAND CRAFT PRODUCTS, CO.
FSC: 8040
NIIM: 00F012888
Manufacturer's CAGE: INLAN
Part No. Indicator: A
Chemical Name and Synonyms: Super Gel Flux
Part Number/Trade Name: 60032/Inland SuperGel Flux
Chemical Family: Organic acid soldering flux

SECTION I - GENERAL INFORMATION

Manufacturer's Name: Inland Craft Products, Co.
Manufacturer's Street: 32052 Edward
Manufacturer's City: Madison Heights
Manufacturer's State: Michigan
Manufacturer's Zip: 48071
Manufacturer's Emergency Phone: 1-248-583-7150
Manufacturer's Phone: 1-248-583-7150

SECTION II - INGREDIENTS

Proprietary: YES
Ingredient: PROPRIETARY
Paints, Preservatives and Solvents:

• Pigments: N/A
• Catalyst: N/A
• Vehicle: Water
• Solvents: N/A
• Additives: N/A
• Others: N/A

Alloys and Metallic Coatings:

• Base Metal: N/A
• Alloys: N/A
• Metallic Coatings: N/A
• Filler Metal Plus Coating or Core Flux: N/A
• Other: N/A

Hazardous Mixtures of Other Liquids, Solids or Gasses
Glutamic acid Hydrochloride: Cas# 15767-75-6, 5-10%, TLV: N/A
Urea: Cas#: 57-13-6, Amount: 4-10%, TLV: N/A
Water: Cas# 7732-18-5, Amount: over 80%, TLV: N/A

SECTION III - PHYSICAL DATA

Boiling Point (º F): 220
Vapor Pressure (mm Hg.): N/A
Vapor Density (AIR=1): N/A
Specific Gravity (Water=1): 1.04
Percent Volatile by Volume (%): 85
Evaporation Rate (Water=1): 0.9
Solubility in Water: Unlimited
Appearance and Odor: Blue Transparent Liquid, lemon odor

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): N/A
Flammable Limits: N/A
Extinguishing Media: N/A
Special Fire Fighting Procedures: Normal caution when dealing with chemicals
Unusual Fire and Explosion Hazards: Will release small amounts of hyrochloric acid fumes upon decomposition

SECTION V - HEALTH HAZARD DATA

Threshold Limit Value: N/A
Effects of Overexposure: None known. No specific information available
Emergency First Aid Procedures:

• Eye: Flush with water for 10 minutes, call physician
• Skin: Wash thoroughly with water
• Inhalation: Remove to fresh air
• Ingestion: Drink water or milk

SECTION VI - REACTIVITY DATA

Stability:
Conditions to avoid:
Incompatibility (Materials to avoid):
Hazardous Decomposition Products: Small amounts of hydrochloric acid
Hazardous Polymerization:

SECTION VII - SPILL OR LEAK PROCEDURES

Steps to be taken in Case Material is Released or Spilled: Neutralize with soda ash or sodium bicarbonate and wash with water.

Waste Disposal Method: First neutralize with soda ash or sodium bicarbonate, dilute with water and dispose in accordance with local and state EPA regulations.

SECTION VIII - SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): NIOSH approved respirator
Ventilation:

• Local Exhaust: Yes
• Special: N/A
• Mechanical (General): Yes
• Other: N/A

Protective Gloves:
Eye Protection: Safety Glasses/Goggles
Other Protective Equipment: Optional

SECTION IX - SPECIAL PRECAUTIONS

Precautions for Handling and Storing: Store away from heat to protect plastic containers.
Other Precautions: None

Return to MSDS Index

If you don't see the navigation bar at the top of the screen, click on the Inland logo above.