MATERIAL DATA SAFETY SHEET
INLAND BRASS PATINA

INLAND CRAFT PRODUCTS, CO.
FSC: 8040
NIIM: 00F012888
Manufacturer's CAGE: INLAN
Part No. Indicator: A
Chemical Name and Synonyms: Copper sulfate solutions
Part Number/Trade Name: 60036/Brass Patina
Chemical Family: Mixture

SECTION I - GENERAL INFORMATION

Manufacturer's Name: Inland Craft Products, Co.
Manufacturer's Street: 32052 Edward
Manufacturer's City: Madison Heights
Manufacturer's State: Michigan
Manufacturer's Zip: 48071
Manufacturer's Emergency Phone: 1-248-583-7150
Manufacturer's Phone: 1-248-583-7150

SECTION II - INGREDIENTS

Proprietary: YES
Ingredient: PROPRIETARY
Paints, Preservatives and Solvents:

• Pigments: N/A
• Catalyst: N/A
• Vehicle: Water
• Solvents: N/A
• Additives: N/A
• Others: N/A

Alloys and Metallic Coatings:

• Base Metal: N/A
• Alloys: N/A
• Metallic Coatings: N/A
• Filler Metal Plus Coating or Core Flux: N/A
• Other: N/A

Hazardous Mixtures of Other Liquids, Solids or Gasses: N/A

SECTION III - PHYSICAL DATA

Boiling Point (º F): Similar to water
Vapor Pressure (mm Hg.): Similar to water
Vapor Density (AIR=1): Similar to water
Specific Gravity (Water=1): 1.2
Percent Volatile by Volume (%): Similar to water
Evaporation Rate (Water=1): 1.0
Solubility in Water: Complete
Appearance and Odor: Dark blue, odorless

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

Flash Point (Method Used): Non-flammable
Flammable Limits: N/A
Extinguishing Media: Compatible with watersplay, CO₂
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

SECTION V - HEALTH HAZARD DATA

Threshold Limit Value: None established
Effects of Overexposure: Marked irritation to skin, eyes and mucous membranes.
Emergency First Aid Procedures:

• Eye: Wash with water for 15 minutes, seek medical attention
• Skin: Wash with soap and water
• Inhalation: N/A
• Ingestion: Give water, milk of magnesia, induce vomiting. Contact physician

SECTION VI - REACTIVITY DATA

Stability: Stable
Conditions to avoid: N/A
Incompatibility (Materials to avoid): None
Hazardous Decomposition Products: Oxides or sulfur, sulfuric acid vapors
Hazardous Polymerization: Will not occur

SECTION VII - SPILL OR LEAK PROCEDURES

Steps to be taken in Case Material is Released or Spilled: Collect and treat as required. Flush remaining material to chemical sewer.

Waste Disposal Method: Adjust pH to 7-9 with lime. Allow solids to settle. Decant clear liquid to drain. Reclaim or sell copper sludge.

SECTION VIII - SPECIAL PROTECTION INFORMATION

Respiratory Protection (Specify Type): Not normally required
Ventilation:

• Local Exhaust: N/A
• Special: N/A
• Mechanical (General): N/A
• Other: N/A

Protective Gloves: Rubber
Eye Protection: Goggles
Other Protective Equipment: Protective clothing

SECTION IX - SPECIAL PRECAUTIONS

Precautions for Handling and Storing: Keep in closed container in a cool, dry storage location.
Other Precautions: None

MSDS Index