MSRP - $424.95

10880 SwapTop™ 8" Flat Lap Machine

The SwapTop™ 8" Flat Lap is the most affordable 8" cabbing set up available today. With over 75% more diamond surface than our 6" machine, you can work bigger pieces and work faster than ever before. Because of its unique low profile design, the SwapTop can be taken anywhere, but it will still pass muster on the workbench at home.

Water cooled system means no messy oil to clean up. 2800 RPM motor allows you to quickly finish the finest cabs possible. This machine includes (almost*) everything you need to start making cabochons today.

* Rocks sold separately.

Key Features

• 8" Diamond Disks: Includes (4) diamond disks plus a polishing pad.
  (1) 170 Grit 8" Flat Lap
  (1) 325 Grit 8" Flat Lap
  (1) 600 Grit 8" Flat Lap
  (1) 1200 Grit 8" Flat Lap
• Quiet and Powerful: Our direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times the price. Comes complete with integrated speed controller.
• Quick and Easy: No hassle product assembly, operation is easy and straight forward, and diamond disk changes take less than a minute.
• Converts to Trim Saw: Quickly and easily converts to a SwapTop™ Trim Saw with the optional conversion kit.
• Converts to Edger/Shaper: Quickly and easily converts to a SwapTop™ Edger/Shaper with the optional conversion kit.
• Can be used with 6" OR 8" laps.
• Two Year Full Confidence Warranty

SwapTop machines ship with 115V / 60Hz motors and grounded USA plugs. Many alternate voltages and or plug configurations are available at no additional cost, please see this chart for those available choices. Enter the proper Voltage and Plug Letter into the Notes section of your order.

Includes: Motor unit, base, grinder work surface, (4) 8" diamond laps, polishing pad, Polishing Powder & Brush, Water Drip System, splashguard, Master Lap & arbor, and instruction guide.

• Size: 11" wide x 10" deep x 7" high
• Motor Type: Permanent Magnet DC, rectified for AC use
• Motor Torque: 48 oz-in (.339 N-m)
• Watts In: 245 / Watts Out: 154
• Motor RPM: 2,800
• Integrated Speed Control for near infinite adjustment
• Arbor OD: 1/2"
• Fits any 6" or 8" laps with 1/2" arbor holes

Available Parts and Accessories

• 6" and 8" Diamond Laps: Laps for grinding, polishing, and shaping.
• SwapTop Grinder Accessories: Products to enhance the operation and performance of your SwapTop™ machines.